HeartStart AED

HeartStart HS1

AED

Find similar products

Designed for the ordinary person in the extraordinary moment, Philips HeartStart HS1 AED is ready to act and virtually ready to go. It allows anyone with little or no training to treat the most common cause of suspected sudden cardiac arrest (SCA) by delivering a shock quickly and effectively, wherever SCA happens. The HS1 AED provides practically real-time guidance through step-by-step voice commands from pad placement to performing CPR. When every minute counts, Philips HeartStart HS1 AED is the partner by your side. Side by side. Step by step.

Features
Ready to go the moment it arrives

Ready to act. Ready to go.

HS1 is virtually ready to go the moment it arrives. With the Ready-Pack configuration, the HS1 AED is positioned inside the carry case, with Adult SMART Pads Cartridge and battery already installed and with a spare Adult SMART pads cartridge in place. Just pull the green tab to launch the initial self-test and press the green On/Off button, which activates voice instructions and visual icons.
Guide the treatment of sudden cardiac arrest

Start quickly. Treat confidently.

HS1 includes features to help guide the treatment of sudden cardiac arrest with easy setup, clear voice commands and a real time metronome for performing CPR. HS1 conducts a series of automatic self-tests daily, weekly and monthly, including testing the pads, internal circuitry, waveform delivery and battery capacity so you can be assured when the moment comes, you will have a partner by your side.
Integrated SMART Pads

Easy as 1-2-3

We’ve equipped HS1 with integrated SMART Pads that will provide feedback to the AED so it can adapt its voice instructions to your actions and your pace. The system won’t announce the next step until you are ready. Prompts are repeated and rephrased if needed and include additional instructions to aid understanding. The system senses when the special Infant/Child SMART Pads cartridge is installed and automatically adjusts CPR instructions and shock energy to a level more appropriate for infants and children under 25 kg or 55 lbs. or 0-8 years old.

Tuotetiedot

Battery
Battery
Standby Life
  • Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses)
Capacity
  • Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)
Install-by Date
  • Battery is labeled with an install-by date of at least five years from date of manufacture
Type
  • 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells
Automated and User-activated Self-tests
Automated and User-activated Self-tests
Status Indicator
  • Blinking green "Ready" light indicates ready for use. Audible "chirp" indicates need for maintenance
Daily Automatic Self-tests
  • Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity
Pads Integrity Test
  • Specifically tests readiness-for-use of pads (gel moisture)
Battery Insertion Test
  • Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness
Data Recording and Transmission
Data Recording and Transmission
Infrared
  • Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol
Data Stored
  • First 15 minutes of ECG and the entire incident's events and analysis decisions
SMART Pads
SMART Pads
How Supplied
  • Disposable cartridge, containing adhesive defibrillation pads, clicks into defibrillator for an integrated pads solution
Training pads (optional)
  • Special pads put HeartStart into training mode and disable its energy delivery capability. Training pads feature 8 real-world training scripts. Use with training mat (included) or with adapters on manikins
Cable Length
  • Adult pads: 137 cm (54"); Infant/Child pads: 102 cm (40")
Use-by Date
  • Cartridge is labeled with a use-by date of at least two years from date of manufacture
Energy delivered
  • Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm load
Active Surface Area
  • 85 cm² (13.2 in²) each
Environmental/Physical Requirements
Environmental/Physical Requirements
Standby Altitude
  • > 48 hours from 0 to 8,500 ft and <48 hours from 8,500 to 15,000 ft
EMI (Radiated/Immunity)
  • Meets EN55011 Group 1 Level B Class B and EN61000-4-3
Standby Temperature
  • 0 - 43 °C (32 - 109 °F)
Operating Humidity
  • 0 to 95 % relative humidity (non-condensing)
Standby Humidity
  • 0 to 75 % relative humidity (non-condensing)
Environmental/Physical Requirements
Environmental/Physical Requirements
Operating Altitude
  • 0 to 4,500 m (0 to 15,000 ft)
Shock/Drop Abuse Tolerance
  • Withstands 1 meter drop to any edge, corner, or surface
Vibration
  • Meets EN1789 random and swept sine, road ambulance specification in operating and standby states
Sealing
  • Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1
Operating Temperature
  • 0 - 50 °C (32 - 122 °F)
Product Specifications
Product Specifications
Shock-to-Shock Cycle Time
  • Typically less than 20 seconds between shocks in a series
CPR Guidance
  • Instructions for adult and infant/child CPR available at user selection
Indicators
  • Ready light, blue i-button, caution light
Shock Delivery
  • Via adhesive pads placed on patient's bare skin as illustrated on pads
Quick Shock
  • Able to deliver a shock after the end of a CPR interval, typically in eight seconds
Voice Instructions
  • Detailed voice messages guide responder through use of the defibrillator
Defibrillation peak current - Adult
  • 32 A (150 J nominal) into a 50 ohm load
Kit Contents
  • Defibrillator, battery (one, pre-installed), SMART Pads (one set, pre-installed), set-up/maintenance guide with expiration date tags, owner's manual, quick reference guide
Waveform
  • SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance
Defibrillation peak current - Pediatric
  • 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge)
Controls
  • Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button
  • * The Infant/Child pads cartridge is sold separately, and available only under the order of a physician, by prescription only in the United States.